|Table of Contents|

Evaluation of lateral flow deformation of asphalt mixture based on FBG(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2019年04期
Page:
1-11
Research Field:
道路与铁道工程
Publishing date:

Info

Title:
Evaluation of lateral flow deformation of asphalt mixture based on FBG
Author(s):
GAO Jun-qi1 WEI Lu-nan12 HOU Yan-ming3
Nanjing 210037, Jiangsu, China)
Keywords:
pavement material asphalt mixture flow deformation rutting lateral strain FBG
PACS:
U416.217
DOI:
-
Abstract:
In order to analyze the lateral flow deformation of asphalt mixture, a rutting test of asphalt mixture was conducted, and the law of lateral strain on the surface of asphalt mixture was researched by using the fiber Bragg grating(FBG)sensor installed on the slab surface of asphalt mixture. With the maximum strain and the absolute value of lateral strain rate in creep stability stage as evaluation indexes, the lateral flow deformation of asphalt mixture was analyzed. Analysis result indicates that the lateral flow deformation decreases with the decreases of both the maximum strain of asphalt mixture and the absolute value of lateral strain rate. The lateral flow deformation develops continuously under the action of cyclic loading. The nearer the test point to the wheel, the heavier its flow deformation is. When the rubber powder contents are 0, 15% and 18%, the lateral strain rates at test point with a distance of 63 mm to the wheel are 6.8×10-6, 4.0×10-7 and 6.4×10-6 min-1, respectively. Therefore, the asphalt mixture with 15% rubber powder content has larger capacity to resist lateral flow deformation in high temperature. For the asphalt mixtures with 15% rubber powder content, when their aggregate gradations are selected as coarse gradation of AC-13 and fine gradation of AC-13, the lateral strain rates at test point with a distance of 28 mm to the wheel are 6.0×10-7 and 7.7×10-6 min-1, respectively, so the anti-lateral flow deformation capability of AC-13 coarse-graded mixture in high temperature is better than that of AC-13 fine-graded mixture. The maximum strain of rubber powder modified asphalt mixture is 1.96×10-4, but for the asphalt mixture modified by rubber powder and rutting resistance additive, the value is only 1.22×10-4, which shows that under the condition of high temperature, the asphalt mixture modified by rubber powder and rutting resistance additive has higher overall structural strength and can bear the direct effect from the wheel load without lateral movement to both sides, which could cause larger lateral flow deformation. The evaluation of lateral flow deformation to asphalt mixture based on the FBG lateral strain can well illustrate the effect of different material and gradation characteristics on the lateral flow deformation of asphalt pavement. 7 tabs, 10 figs, 30 refs.

References:

[1] WANG Hong-chang, LI Guo-fen. Study of factors influencing gussasphalt mixture performance[J]. Construction and Building Materials, 2015, 101: 193-200.
[2] DU Yin-fei, CHEN Jia-qi, HAN Zheng, et al. A review on solutions for improving rutting resistance of asphalt pavement and test methods [J]. Construction and Building Materials, 2018, 168: 893-905.
[3] WANG Hui, ZHANG Qi-sen, TAN Ji-qing. Investigation of layer contributions to asphalt pavement rutting[J]. Journal of Materials in Civil Engineering, 2009, 21(4): 181-185.
[4] 乔英娟,王抒红,郭忠印.基于侧向位移法的沥青路面抗车辙影响因素[J].同济大学学报(自然科学版),2009,37(11):1487-1491.
QIAO Ying-juan, WANG Shu-hong, GUO Zhong-yin. Influence parameters of asphalt pavement rutting resistance based on lateral displacement method[J]. Journal of Tongji University(Natural Science), 2009, 37(11): 1487-1491.(in Chinese)
[5] ZHU Jing-wen, SUN Li-jun, WANG Yi, et al. Development and calibration of shear-based rutting model for asphalt concrete layers[J]. International Journal of Pavement Engineering, 2017, 18(10): 937-944.
[6] 栗培龙,张争奇,李洪华,等.沥青混合料汉堡车辙试验方法[J].交通运输工程学报,2010,10(2):30-35.
LI Pei-long, ZHANG Zheng-qi, LI Hong-hua, et al. Methods of Hamburg wheel tracking tests for asphalt mixture[J]. Journal of Traffic and Transportation Engineering,2010, 10(2): 30-35.(in Chinese)
[7] KIM D,KIM Y R. Development of stress sweep rutting(SSR)test for permanent deformation characterization of asphalt mixture[J]. Construction and Building Materials,2017, 154: 373-383.
[8] 关永胜,谈至明,张志祥.间断级配橡胶沥青混合料抗车辙性能[J].同济大学学报(自然科学版),2013,41(5):705-709.
GUAN Yong-sheng, TAN Zhi-ming, ZHANG Zhi-xiang. Rutting performance of gap graded asphalt rubber mixtures [J]. Journal of Tongji University(Natural Science), 2013, 41(5): 705-709.(in Chinese)
[9] DONG Ni-ya, NI Fu-jian, ZHOU Lan, et al. Comparison of the Hamburg, indirect tensile, and multi-sequenced repeated load tests for evaluation of HMA rutting resistance[J]. Construction and Building Materials, 2019, 216: 588-598.
[10] TAYFUR S, OZEN H, AKSOY A. Investigation of rutting performance of asphalt mixtures containing polymer modifiers [J]. Construction and Building Materials, 2007, 21: 328-337.
[11] SAID S F, HAKIM H, OSCARSSON E, et al. Prediction of flow rutting in asphalt concrete layers[J]. International Journal of Pavement Engineering, 2011, 12(6): 519-532.
[12] JAVILLA B, MO Lian-tong, HAO Fang, et al. Multi-stress loading effect on rutting performance of asphalt mixtures based on wheel tracking testing[J]. Construction and Building Materials, 2017, 148: 1-9.
[13] KHIAVI A K,MANSOORI S. The performance of hot mix asphalt in dynamic and static creep tests[J]. Petroleum Science and Technology, 2017, 35(15): 1627-1634.
[14] RUSHING J F, LITTLE D N, GARG N. Selecting a rutting performance test for airport asphalt mixture design[J]. Road Materials and Pavement Design, 2014, 15(S): 172-194.
[15] AL-KHATEEB G G, OBAIDAT TIAS, KHEDAYWI T S, et al. Studying rutting performance of superpave asphalt mixtures using unconfined dynamic creep and simple performance tests[J]. Road Materials and Pavement Design,2018, 19(2): 315-333.
[16] LI Song, NI Fu-jian, ZHAO Zi-li, et al. Fractal evaluation of the rutting development for multilayer pavement by wheel tracking test[J]. Construction and Building Materials, 2019, 222: 706-716.
[17] ZHANG Wei-guang, SHEN Shi-hui, WU Sheng-hua, et al. Prediction model for field rut depth of asphalt pavement based on hamburg wheel tracking test properties[J]. Journal of Materials in Civil Engineering, 2017, 29(9): 1-10.
[18] AL-MOSAWE H, THOM N, AIREY G, et al. Linear viscous approach to predict rut depth in asphalt mixtures[J]. Construction and Building Materials, 2018, 169: 775-793.
[19] 鲁正兰,孙立军.沥青路面车辙预估方法的研究[J].同济大学学报(自然科学版),2007,35(11):1476-1480.
LU Zheng-lan, SUN Li-jun. Research on rutting prediction of asphalt pavement[J]. Journal of Tongji University(Natural Science), 2007, 35(11): 1476-1480.(in Chinese)
[20] JAVILLA B, FANG Hao, MO Lian-tong, et al. Test evaluation of rutting performance indicators of asphalt mixtures[J]. Construction and Building Materials, 2017, 155: 1215-1223.
[21] 朱云升,郭忠印,王 景.高温重载条件下沥青混合料的蠕变试验研究[J].建筑材料学报,2008,11(5):545-549.
ZHU Yun-sheng, GUO Zhong-yin, WANG Jing. Creep test and research on asphalt mixture at high temperature and heavy load [J]. Journal of Building Materials, 2008, 11(5): 545-549.(in Chinese)
[22] GAO Li-bo, WANG Zhe-ren, DENG Chang-ning, et al. Analysis on Effect Factors of Rutting Performance[C]∥ASCE. Proceedings of the 8th International Conference of Chinese Logistics and Transportation Professionals—Logistics. Reston: ASCE, 2008: 3772-3778.
[23] ABD-ALLA E S M, MORIYOSHI A, PARTL M N, et al. New wheel tracking test to analyze movements of aggregates in multi-layered asphalt specimens[J]. Journal of the Japan Petroleum Institute, 2006, 49(5): 274-279.
[24] KONDO T, MORIYOSHI A, YOSHIDA T, et al. Deformation properties of asphalt mixture on various loading conditions for wheel tracking test[J]. Journal of the Japan Petroleum Institute, 2005, 48(5): 260-271.
[25] HU Jing, QIAN Zhen-dong, LIU Yang, et al. High-temperature failure in asphalt mixtures using micro-structural investigation and image analysis[J]. Construction and Building Materials, 2015, 84: 136-145.
[26] BAIRGI B K, TAREFDER R A, AHMED M U. Long-term rutting and stripping characteristics of foamed warm-mix asphalt(WMA)through laboratory and field investigation[J]. Construction and Building Materials, 2018, 170: 790-800.
[27] CHATURABONG P, BAHIA H U. Mechanisms of asphalt mixture rutting in the dry Hamburg Wheel Tracking test and the potential to be alternative test in measuring rutting resistance[J]. Construction and Building Materials, 2017, 146: 175-182.
[28] MA Tao, ZHANG De-yu, ZHANG Yao, et al. Simulation of wheel tracking test for asphalt mixture using discrete element modelling[J]. Road Materials and Pavement Design, 2018,19(2): 367-384.
[29] 李 红,祝连庆,刘 锋,等.裸光纤光栅表贴结构应变传递分析与实验研究[J].仪器仪表学报,2014,35(8):1744-1750.
LI Hong, ZHU Lian-qing, LIU Feng, et al. Strain transfer analysis and experimental research of surface-bonded bare FBG[J]. Chinese Journal of Scientific Instrument, 2014, 35(8): 1744-1750.(in Chinese)
[30] 孙阳阳,王 源,章征林,等.表面粘贴式光纤布拉格光栅应变传递规律分析与实验研究[J].功能材料,2016,47(7):7046-7050,7055.
SUN Yang-yang, WANG Yuan, ZHANG Zheng-lin, et al. Analysis and experimental research on the principle of surface bonded FBG strain transfer[J]. Journal of Function Materials, 2016, 47(7): 7046-7050, 7055.(in Chinese)

Memo

Memo:
-
Last Update: 2019-09-03