|Table of Contents|

Wear detection method of CL60 railway wheel and U75V rail steel based on nonlinear ultrasound(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2021年06期
Page:
136-146
Research Field:
道路与铁道工程
Publishing date:

Info

Title:
Wear detection method of CL60 railway wheel and U75V rail steel based on nonlinear ultrasound
Author(s):
CAI Zhi-chao12 CHEN Lan2 LI Hao2 QIN Tao3 SHEN Ming-xue13
(1. State Key Laboratory of Performance Monitoring and Protecting of Rail Transit Infrastructure, East China Jiaotong University, Nanchang 330013, Jiangxi, China; 2. School of Electrical and Automation Engineering,East China Jiaotong University, Nanchang 330013, Jiangxi, China; 3. School of Materials Science and Engineering, East China Jiaotong University, Nanchang 330013, Jiangxi, China)
Keywords:
railway engineering wheel/rail friction damage ultrasonic testing finite element model ultrasonic nonlinear coefficient rolling wear assessment
PACS:
U211.5
DOI:
10.19818/j.cnki.1671-1637.2021.06.010
Abstract:
With an aim to resolve the difficulty of the characterization of the change process of early wheel/rail rolling wear by non-destructive measurement, a nonlinear ultrasonic technology was proposed to detect and evaluate CL60 wheel and U75V rail specimens with different wear degrees. The Murnaghan model was established based on the surface wear characteristics of wheel/rail specimens. A finite element simulation of nonlinear ultrasonic was used to simulate different degrees of friction damage based on the plastic deformation layer thickness. The change law of the relative nonlinear coefficient and its causes in the process ofwheel/rail friction damage, were analyzed. Experimental results indicate that the early wear of wheel/rail can result in the formation of a plastic deformation layer on the material surface, and with the aggravation of plastic deformation, the material damage appears mainly through microcracks. With an increase in the wheel angular acceleration, the relative sliding time between wheel and rail is shorter, the plastic deformation layer is thinner, and the CL60 wheel wear is more serious than the U75V rail wear. When the wheel angular accelerations for the CL60 wheel specimens are 10, 250, and 1 500 r·min-2, respectively, the corresponding relative nonlinear coefficients are 12.19, 8.43, and 5.68, respectively. When the wheel angular accelerations for the U75V rail specimens are 10, 250, and 1 500 r·min-2, respectively, the corresponding relative nonlinear coefficients are 7.57, 6.09, and 5.04, respectively. Compared with the CL60 wheel specimens, the nonlinear coefficient of the U75V rail specimens changes more slowly. Therefore, the relative nonlinear coefficient and plastic deformation layer thickness are positively correlated, and the nonlinear effect caused by microcracks is stronger than that of the plastic deformation layer, resulting in a high increase in the relative nonlinear coefficient. Thus, the wear stage of a material can be determined by the change in the relative nonlinear coefficient of the material. 2 tabs, 15 figs, 30 refs.

References:

[1] 董永刚,仪 帅,黄鑫磊,等.重载列车紧急制动过程车轮踏面疲劳裂纹萌生寿命预测[J].中国铁道科学,2021,42(5):123-131.
DONG Yong-gang, YI Shuai, HUANG Xin-lei, et al. Prediction of fatigue crack initiation life of wheel tread during emergency braking of heavy haul train[J]. China Railway Science, 2021, 42(5): 123-131.(in Chinese)
[2] 马晓川,刘林芽,冯青松,等.铁路钢轨裂纹萌生的键型近场动力学预测模型[J].交通运输工程学报,2021,21(3):228-237.
MA Xiao-chuan, LIU Lin-ya, FENG Qing-song, et al. Prediction model of rail crack initiation using bond-based peridynamics theory[J]. Journal of Traffic and Transportation Engineering, 2021, 21(3): 228-237.(in Chinese)
[3] 任安超,朱 敏,费俊杰,等. U75V和U68CrCu钢轨钢早期腐蚀机理研究[J].中国铁道科学,2014,35(5):7-12.
REN An-chao, ZHU Min, FEI Jun-jie, et al. Early corrosion mechanism of U75V and U68CrCu rail steel[J]. China Railway Science, 2014, 35(5): 7-12.(in Chinese)
[4] 昝晓东,李孝滔,邢帅兵,等.疲劳裂纹扩展引起的钢轨表面剥离研究[J].铁道科学与工程学报,2018,15(12):3082-3088.
ZAN Xiao-dong, LI Xiao-tao, XING Shuai-bing, et al. Analysis of rail surface shelling resulting from fatigue crack propagation[J]. Journal of Railway Science and Engineering, 2018, 15(12): 3082-3088.(in Chinese)
[5] 曹世豪,李佳莉,杨荣山,等.滚动接触作用下钢轨表面裂纹扩展机理分析[J].华中科技大学学报(自然科学版),2017,45(4):11-15.
CAO Shi-hao, LI Jia-li, YANG Rong-shan, et al. Propagation mechanism analysis of crack on rail surface under rolling contact[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2017, 45(4): 11-15.(in Chinese)
[6] 肖 乾,王丹红,陈道云,等.高速列车轮轨激励作用机理及其影响综述[J].交通运输工程学报,2021,21(3):93-109.
XIAO Qian, WANG Dan-hong, CHEN Dao-yun, et al. Review on mechanism and influence of wheel-rail excitation of high-speed train[J]. Journal of Traffic and Transportation Engineering, 2021, 21(3): 93-109.(in Chinese)
[7] 敬 霖,刘 凯.车轮踏面缺陷引起的轮轨动态响应综述[J].交通运输工程学报,2021,21(1):285-315.
JING Lin, LIU Kai. Review on wheel-rail dynamic responses caused by wheel tread defects[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 285-315.(in Chinese)
[8] 赵 鑫,温泽峰,王衡禹,等.中国轨道交通轮轨滚动接触疲劳研究进展[J].交通运输工程学报,2021,21(1):1-35.
ZHAO Xin, WEN Ze-feng, WANG Heng-yu, et al. Research progress on wheel/rail rolling contact fatigue of rail transit in China[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 1-35.(in Chinese)
[9] 周桂源,何成刚,文 广,等.高速和低速工况下列车车轮的损伤行为对比[J].机械工程材料,2016,40(10):6-10,64.
ZHOU Gui-yuan, HE Cheng-gang, WEN Guang, et al. Comparison of damage behaviors of railway wheel under high and low speed conditions[J]. Materials for Mechanical Engineering, 2016, 40(10): 6-10, 64.(in Chinese)
[10] 周小林,向延念,陈秀方.U71Mn 50 kg·m-1普通碳素钢钢轨疲劳裂纹扩展速率试验研究[J].中国铁道科学,2004,25(3):87-91.
ZHOU Xiao-lin, XIANG Yan-nian, CHEN Xiu-fang. Test and study of fatigue fracture propagation of U71Mn 50 kg·m-1 ordinary carbon steel rail[J]. China Railway Science, 2004, 25(3): 87-91.(in Chinese)
[11] 马明阳.高速列车车轮磨耗预测及关键影响因素仿真分析[D].北京:中国铁道科学研究院,2016.
MA Ming-yang. Prediction and key factors simulation on wheel wear of high-speed train[D].Beijing: China Academy of Railway Sciences, 2016.(in Chinese)
[12] 尹波润,文永蓬,尚慧琳.基于元胞自动机方法的地铁车轮磨损动态建模与仿真[J].机械工程学报,2019,55(2):135-146.
YIN Bo-run, WEN Yong-peng, SHANG Hui-lin. Dynamic modeling and simulation of metro wheel wear based on cellular automata method[J]. Journal of Mechanical Engineering, 2019, 55(2): 135-146.(in Chinese)
[13] 申永代.U78CrV钢轨非典型线状剥离掉块伤损分析[J].金属材料与冶金工程,2019,47(5):26-31.
SHEN Yong-dai. Damage analysis of atypical linear exfoliations on U78CrV rails[J]. Metal Materials and Metallurgy Engineering, 2019, 47(5): 26-31.(in Chinese)
[14] ZHANG Xin, HAO Qiu-shi, WANG Kang-wei, et al. An
investigation on acoustic emission detection of rail crack in actual application by chaos theory with improved feature detection method[J]. Journal of Sound and Vibration, 2018, 436: 165-182.
[15] ZHANG Xin, CUI Yi-ming, WANG Yan, et al. An improved AE detection method of rail defect based on multi-level ANC with VSS-LMS[J]. Mechanical Systems and Signal Processing, 2018, 99: 420-433.
[16] PENG Jian-ping, TIAN Gui-yun, WANG Li, et al. Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization[J]. NDT and E International, 2015, 74: 72-80.
[17] PATHAK M, ALAHAKOON S, SPIRYAGIN M, et al.
Rail foot flaw detection based on a laser induced ultrasonic guided wave method[J]. Measurement, 2019, 148: 106922.
[18] NAGATO K, SHINTANI K, HAMAGUCHI T, et al. Real-time detection of microcracks with floating giant-magnetoresistance sensor in twin-disk sliding tests[J]. CIRP Annals, 2017, 66(1): 539-542.
[19] 王 嵘,余祖俊,朱力强,等.基于导波速度的无缝钢轨应力检测方法[J].中国铁道科学,2018,39(2):18-27.
WANG Rong, YU Zu-jun, ZHU Li-qiang, et al. Detection method for stress in continuously welded rail based on guided wave velocity[J]. China Railway Science, 2018, 39(2): 18-27.(in Chinese)
[20] HU Hong-wei, ZOU Zhi-cheng, JIANG You-bao, et al. Finite element simulation and experimental study of residual stress testing using nonlinear ultrasonic surface wave technique[J]. Applied Acoustics, 2019, 154: 11-17.
[21] MAO Han-ying, ZHANG Yu-hua, MAO Han-ling, et al.
The fatigue damage evaluation of gear in sugarcane presser using higher order ultrasonic nonlinear coefficients[J]. Results in Physics, 2018, 10: 601-606.
[22] 万楚豪,刚 铁,刘 斌,等.高速铁路钢轨疲劳过程的超声非线性系数表征[J].中国铁道科学,2015,36(5):75-79.
WAN Chu-hao, GANG Tie, LIU Bin, et al. Characterization of nonlinear ultrasonic coefficient during rail fatigue process of high speed railway[J]. China Railway Science, 2015, 36(5): 75-79.(in Chinese)
[23] 李 伟,张璐莹,黄远航,等.碳纤维复合材料疲劳损伤的非线性超声评价方法[J].无损检测,2019,41(8):1-5.
LI Wei, ZHANG Lu-ying, HUANG Yuan-hang, et al. Nonlinear ultrasonic assessment method for fatigue damage of carbon fiber composite[J]. Nondestructive Testing, 2019, 41(8): 1-5.(in Chinese)
[24] HONG Ming, SU Zhong-qing, WANG Qiang, et al. Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation, and experimental validation[J]. Ultrasonics, 2014, 54: 770-778.
[25] PANTEA C, OSTERHOUDT C F, SINHA D N. Determination of acoustical nonlinear parameter β of water using the finite amplitude method[J]. Ultrasonics, 2013, 53(5): 1012-1019.
[26] LIU S M, BEST S, NEILD S A, et al. Measuring bulk
material nonlinearity using harmonic generation[J]. NDT and E International, 2012(48): 46-53.
[27] DENG Ming-xi. Analysis of second-harmonic generation of
Lamb modes using a modal analysis approach[J]. Journal of Applied Physics, 2003(94): 4152-4159.
[28] VEN DEN ABEELE K, SUTIN A, CARMELIET J, et al.
Micro-damage diagnostics using nonlinear elastic wave spectroscopy(NEWS)[J]. NDT and E International, 2001, 34(4): 239-248.
[29] 周 崎,刘莹峰,樊嘉琦,等.金属疲劳损伤的线性与非线性超声联合评价方法研究[J].中国测试,2021,47(5):151-155.
ZHOU Qi, LIU Ying-feng, FAN Jia-qi, et al. Research on linear and nonlinear ultrasonic joint evaluation method of metal fatigue damage[J]. China Measurement and Test, 2021, 47(5): 151-155.(in Chinese)
[30] BJØRNØ L. Introduction to nonlinear acoustics[J]. Physics Procedia, 2010, 3(1): 5-16.

Memo

Memo:
-
Last Update: 2021-12-20