|Table of Contents|

Research progress and engineering application of long lasting high performance weathering steel bridges(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2020年01期
Page:
1-26
Research Field:
道路与铁道工程
Publishing date:

Info

Title:
Research progress and engineering application of long lasting high performance weathering steel bridges
Author(s):
WANG Chun-sheng;  ZHANG Jing-wen;  DUAN Lan;  TAN Chen-xin
(School of Highway, Chang’an University, Xi’an 710064, Shaanxi, China)
Keywords:
bridge engineering;  long lasting;  high performance weathering steel;  weathering bolt;  corrosion-resistant patina;  corrosion-resistant configuration;  fatigue;  design criterion;  intelligent operation and maintenance
PACS:
U448.36
DOI:
10.19818/j.cnki.1671-1637.2020.01.001
Abstract:
The new research progress and engineering application of weathering steel bridges at home and abroad were systematically generalized and analyzed. The key scientific and technological achievements in the fields of formation mechanism of stable corrosion-resistant patina, material selection standard, corrosion and fatigue damage mechanism, research and development of corrosion-resistant configuration and weathering bolt, and detection and evaluation technology of patina were summarized. The application scope and corrosion allowance design indexes of weathering steel bridges were combed and improved, and the key points of stabilization treatment and construction technology for the patina of weathering steel bridges were proposed. The damage detection and evaluation technology and corrosion damage maintenance and management technology of patina in weathering steel bridges were evaluated and analyzed. Combined with the experience and lessons of weathering steel bridge engineering accidents in the United States and Japan, as well as the construction technological innovation achievements of the first batch of long lasting high performance weathering steel bridges in China, the technological innovation direction in this field was discussed. Research result shows that the composition of corrosion-resistant patina contains the outer layer of γ-FeOOH and α-FeOOH, and the inner layer of amorphous FeOOH compound and Fe3O4. The formation and durability of stable corrosion-resistant patina are mainly affected by the factors such as chloride ion, accumulated water and dust. The material selection zoning map of high performance weathering steel bridges in China is suggested to establish, and the configuration design criterion of stable corrosion-resistant patina should be improved. The modern weathering steel bridge has the technical characteristics of high performance and long lasting. The in-plane stress fatigue, out-of-plane deformation fatigue test, numerical fracture mechanics simulation of configuration details with patina and the research on the long-term damage resistance of weathering high-strength bolts should be promoted to lay the foundation for establishing a perfect design criterion of anti-corrosion and anti-fatigue. The application of artificial intelligence technology will promote the significant progress of intelligent management and maintenance technology of long lasting high performance weathering steel bridges. The investment for research and development should be increased, a specification system should be established for the design, construction and maintenance of long lasting high performance weathering steel bridges with independent intellectual property rights in China, the high-quality engineering and technical talents should be cultivated, thus to promot the development of Chinese strong transportation network. 10 tabs, 28 figs, 62 refs.

References:

[1] 王春生,段 兰,朱经纬,等.创新型高性能钢桥与管翼缘组合梁桥研究[C]∥陈艾荣,阮 欣.第一届全国桥梁维护与安全学术会议论文集.北京:人民交通出版社,2013:157-176. WANG Chun-sheng, DUAN Lan, ZHU Jing-wei, et al. Research on innovative high performance steel bridge and tubular flange composite girder bridge[C]∥CHEN Ai-rong, RUAN Xin. The First National Conference on Bridge Maintenance and Safety. Beijing: China Communications Press, 2013: 157-176.(in Chinese)
[2] 刘玉擎,陈艾荣.耐候钢桥的发展及其设计要点[J].桥梁建设,2003(5):39-41,45. LIU Yu-qing, CHEN Ai-rong. Development and design essentials of weathering steel bridges[J]. Bridge Construction, 2003(5): 39-41, 45.(in Chinese)
[3] ALBRECHT P, CHENG J G. Fatigue tests of 8-yr weathered A588 steel weldment[J]. Journal of Structural Engineering, 1983, 109(9): 2048-2065.
[4] ALBRECHT P, SIDANI M. Fatigue of eight-year weathered A588 steel stiffeners in salt water[J]. Journal of Structural Engineering, 1989, 115(7): 1756-1767.
[5] ALBRECHT P, LENWARI A. Fatigue strength of weathered A588 steel beams[J]. Journal of Bridge Engineering, 2009, 14(6): 436-443.
[6] ALBRECHT P, COBURN S K, WATTAR F M, et al. Guidelines for the use of weathering steel in bridges(NCHRP 314)[R]. Washington DC: Transportation Research Board, 1989.
[7] Federal Highway Administration. Uncoated weathering steel in structures[R]. Washington DC: Federal Highway Administration, 1989.
[8] 王春生,段 兰,王继明,等.基于混合设计的高性能钢梁抗弯性能及延性试验[J].中国公路学报,2012,25(2):81-89. WANG Chun-sheng, DUAN Lan, WANG Ji-ming, et al. Bending behavior and ductility test of high performance steel beam based on hybrid design[J]. China Journal of Highway and Transport, 2012, 25(2): 81-89.(in Chinese)
[9] 王春生,段 兰,郑 丽,等.桥梁高性能钢HPS485W疲劳裂纹扩展速率试验研究[J].工程力学,2013,30(6):212-216. WANG Chun-sheng, DUAN Lan, ZHENG Li, et al. Fatigue crack growth rate tests of high performance steel HPS485W for bridges[J]. Engineering Mechanics, 2013, 30(6): 212-216.(in Chinese)
[10] 王春生,段 兰,胡景雨,等.桥梁高性能钢HPS485W断裂韧性试验研究[J].工程力学,2013,30(8):54-59. WANG Chun-sheng, DUAN Lan, HU Jing-yu, et al. Fracture and toughness tests study of high performance steel HPS485W for bridge engineering[J]. Engineering Mechanics, 2013, 30(8): 54-59.(in Chinese)
[11] MISAWA T, ASAMI K, HASHIMOTO K, et al. The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel[J]. Corrosion Science, 1974, 5(20): 279-289.
[12] 刘国超,董俊华,韩恩厚,等.耐候钢锈层研究进展[J].腐蚀科学与防护技术,2006,18(4):268-272. LIU Guo-chao, DONG Jun-hua, HAN En-hou, et al. Progress in research on rust layer of weathering steel[J]. Corrosion Science and Protection Technology, 2006, 18(4): 268-272.(in Chinese)
[13] MORCILLO M, CHICO B, DíAZ I, et al. Atmospheric corrosion data of weathering steels. A review[J]. Corrosion Science, 2013, 77: 6-24.
[14] YANN H. Atmospheric corrosion study of weathering steel using sensor technology[D]. Boca Raton:Florida Atlantic University, 2007.
[15] ZHANG Q C, WU J S, WANG J J, et al. Corrosion behavior of weathering steel in marine atmosphere[J]. Materials Chemistry and Physics, 2002, 77(2): 603-608.
[16] CHEN Ai-hua, XU Jing-qiu, LI Ran, et al. Corrosion resistance of high performance weathering steel for bridge building applications[J]. Journal of Iron and Steel Research, 2012, 19(6): 59-63.
[17] OKADA H, HOSOI Y, YUKAWA K I, et al. Structure of the rust formed on low alloy steels in atmospheric corrosion[J]. Tetsu-to-Hagane, 2010, 55(5): 355-365.
[18] MISAWA T, KYUNO T, SU?TAKA W, et al. The mechanism of atmospheric rusting and the effect of Cu and P on the rust formation of low alloy steels[J]. Corrosion Science, 1971, 11(1): 35-48.
[19] TOWNSEND H E, SIMPSON T C, JOHONSON G L. Structure of rust on weathering steel in rural and industrial environments[J]. Corrosion Science, 1994, 50(7): 546-554.
[20] YAMASHITA M, MIYUKI H, MATSUDA Y, et al. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century[J]. Corrosion Science, 1994, 36(2): 283-299.
[21] KATAYAMA H, YAMAMOTO M, KODAMA T. Degradation behavior of protective rust layer in chloride solution[J]. Corrosion Engineering, 2000, 49(1): 41-44.
[22] CHOI Y S, KIM J G. Aqueous corrosion behavior of weathering steel and carbon steel in acid-chloride environments[J]. Corrosion, 2012, 56(12): 1202-1210.
[23] DIAZ I, CANO H, CHICO B, et al. Some clarifications regarding literature on atmospheric corrosion of weathering steels[J]. International Journal of Corrosion, 2012, 2012: 1-9.
[24] 张全成,吴建生,陈家光,等.暴露1年的耐大气腐蚀用钢表面锈层分析[J].中国腐蚀与防护学报,2001,21(5):297-300. ZHANG Quan-cheng, WU Jian-sheng, CHEN Jia-guang, et al. Analysis on the corrosion rust of weathering steel exposed in atmosphere[J]. Journal of Chinese Society for Corrosion and Protection, 2001, 21(5): 297-300.(in Chinese)
[25] SUZUKI I, HISAMATSU Y, MASUKO N. Nature of atmospheric rust on iron[J]. Journal of Electrochemical Society, 1980, 127(10): 2210.
[26] STRATMANN M, BOHNENKAMP K, RAMCHANDRAN T. The influence of copper upon the atmospheric corrosion of iron[J]. Corrosion Science, 1987, 27(9): 905-926.
[27] ASAMI K, KIKUCHI M. In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal-industrial atmosphere for 17 years[J]. Corrosion Science, 2003, 45(11): 2671-2688.
[28] NISHIMURA T, KATAYAMA H, NODA K, et al. Effect of Co and Ni on the corrosion behavior of low alloy steels in wet/dry environments[J]. Corrosion Science, 2000, 42(9): 1611-1621.
[29] NISHIMURA T, KODAMA T. Clarification of chemical state for alloying elements in iron rust using a binary-phase potential-pH diagram and physical analyses[J]. Corrosion Science, 2003, 45(5): 1073-1084.
[30] NISHIMURA T. Rust formation and corrosion performance of Si- and Al-bearing ultrafine grained weathering steel[J]. Corrosion Science, 2008, 50(5): 1306-1312.
[31] KIM K Y, HWANG Y H, YOO J Y. Effect of silicon content on the corrosion properties of calcium-modified weathering steel in a chloride environment[J]. Corrosion, 2002, 58(7): 570-583.
[32] ASAMI K, KIKUCHI M. Characterization of rust layers on weathering steels air-exposed for a long period[J]. Journal of the Japan Institute of Metals, 2002, 66(6): 649-656.
[33] 张全成,马 峰,郑文龙.耐候钢表面保护性锈层与基体结合强度的研究[J].机械工程材料,2004,28(6):30-32. ZHANG Quan-cheng, MA Feng, ZHENG Wen-long. Bonding strength between the substrate and protective rust layer of weathering-steel[J]. Mechanical Engineering Materials, 2004, 28(6): 30-32.(in Chinese)
[34] 张全成,吴建生. 耐候钢表面保护性锈层的力学性能[J].钢铁研究学报,2006,18(3):42-45. ZHANG Quan-cheng, WU Jian-sheng. Mechanical properties of protective rust layer formed on surface of weathering steel panels[J]. Journal of Iron and Steel Research, 2006, 18(3): 42-45.(in Chinese)
[35] 姜传海.晶须增强铝复合材料残余应力及钢材锈层残余应力[D].上海:上海交通大学,2001. JIANG Chuan-hai. Whisker reinforced aluminum composite residual stress and steel rust residual stress[D]. Shanghai:Shanghai Jiao Tong University, 2001.(in Chinese)
[36] 王树涛,高克玮,杨善武,等.低碳贝氏体钢在青岛曝晒一年的锈层力学性能和抗热震性能研究[J].腐蚀科学与防护技术,2010,22(1):9-13. WANG Shu-tao, GAO Ke-wei, YANG Shan-wu, et al. Mechanical properties and thermal shock resistance of rust layer formed on low carbon bainitic steel after being exposed in Qingdao atmosphere for one year[J]. Corrosion Science and Protection Technology, 2010, 22(1): 9-13.(in Chinese)
[37] 王 雷,董俊华,柯 伟.加载与循环干湿条件下MnCu耐候钢的腐蚀行为[J].中国腐蚀与防护学报,2010,30(4):257-261. WANG Lei, DONG Jun-hua, KE Wei. Corrosion behavior of MnCu cost-effective weathering steel under cyclic load in a wet/dry cyclic corrosion environment[J]. Journal of Chinese Society for Corrosion and Protection, 2010, 30(4): 257-261.(in Chinese)
[38] GAO K, LI D, PANG X, et al. Corrosion behaviour of low-carbon bainitic steel under a constant elastic load[J]. Corrosion Science, 2010, 52(10): 3428-3434.
[39] KAYSER C R, SWANSON J A, LINZELL D G. Characterization of material properties of HPS-485W(70W)TMCP for bridge girder applications[J]. Journal of Bridge Engineering, 2006, 11(1): 99-108.
[40] CHEN H T, GRONDIN G Y, DRIVER R G. Fatigue properties of high performance steel[C]∥WIT Press. First International Conference on Fatigue Damage of Materials Experiment and Analysis, Fatigue Damage of Materials. Toronto: WIT Press, 2003: 181-191.
[41] CHEN H T, GRONDIN G Y, DRIVER R G. Characterization of fatigue properties of ASTM A709 high performance steel[J]. Journal of Constructional Steel Research, 2007, 63(6): 838-848.
[42] BARTH K E, WHITE D W, BOBB B M. Negative bending resistance of HPS70W girders[J]. Journal of Constructional Steel Research, 2000, 53(1): 1-31.
[43] SAUSE R, FAHNESTOCK L A. Strength and ductility of HPS-100W I-girders in negative flexure[J]. Journal of Bridge Engineering, 2001, 6(5): 316-323.
[44] SALEM E S, SAUSE R. Flexural strength and ductility of highway bridge I-girders fabricated from HPS-100W steel[D]. Bethlehem: Lehigh University, 2004.
[45] YAKEL A J, MANS P, AZIZINAMINI A. Flexural capacity and ductility of HPS-70W bridge girders[J]. Engineering Journal, 2002, 39: 38-51.
[46] 郑 丽.混合设计高性能钢梁抗剪性能研究[D].西安:长安大学,2013. ZHENG Li. Shear performance of hybrid girders fabricated using high performance steel[D]. Xi’an: Chang’an University, 2013.(in Chinese)
[47] TAKAMORI H. Improving fatigue strength of welded joints[D]. Bethlehem: Lehigh University, 2000.
[48] 王春生,王雨竹,崔 冰,等.应力比对钢桥腹板间隙面外变形疲劳性能的影响试验[J].中国公路学报,2017,30(3):72-81. WANG Chun-sheng, WANG Yu-zhu, CUI Bing, et al. Experiment on effect of stress ratio on out-of-plane distortion-induced fatigue performance of web gaps in steel bridges[J]. China Journal of Highway and Transport, 2017, 30(3): 72-81.(in Chinese)
[49] TAKABE M, OHYA M, AJIKI S. Estimation of quantity of Cl- from deicing salts on weathering steels used for bridges[J]. Steel Structures, 2008, 8(2): 73-81.
[50] BD 7/01—1981, design manual for roads and bridges—weathering steel for highway structures[S].
[51] Corus Construction and Industrial. Weathering steel bridges[R]. London: Corus Construction and Industrial, 2010.
[52] KARˇGIV V. Design of corrosion allowances on structures from weathering steel[J]. Procedia Engineering, 2012, 40: 235-240.
[53] YAMADA K. Japanese experience with weathering steel bridges[R]. Nagoya: Nagoya University, 1983.
[54] 辽宁省高等级公路建设局,中铁宝桥集团有限公司,鞍钢集团钢铁研究院,等.公路桥梁耐候钢焊接施工技术指南[R].沈阳:辽宁省高等级公路建设局,2015. Liaoning Provincial Transportation Investment Group. China Railway Baoji Bridge Group Co., Ltd. Ansteel Research Institute of Iron and Steel, et al. Technology guide for construction of highway bridge weathering steel welding[R]. Shenyang: Liaoning Provincial Transportation Investment Group, 2015.(in Chinese)
[55] MCDAD B, LAFFREY D C, DAMMANN M, et al. Performance of weathering steel in TxDOT bridges[R]. Austin: Texas Department of Transportation, 1999.
[56] 陶晓燕,史志强,韩继跃,等.耐候钢桥的高强度螺栓连接试验研究[J].钢结构,2018,33(1):105-108. TAO Xiao-yan, SHI Zhi-qiang, HAN Ji-yue, et al. Experimental research on high strength bolted connection of weathering steel bridge[J]. Steel Construction, 2018, 33(1): 105-108.(in Chinese)
[57] 石振家,王 雷,陈 楠,等.耐候钢表面锈层及其稳定化处理现状与发展趋势[J].腐蚀科学与防护技术,2015,27(5):503-508. SHI Zhen-jia, WANG Lei, CHEN Nan, et al. Current situation and development trend of weathering steel surface rust layer and its stabilization treatment, corrosion science and protection technology[J]. Corrosion Science and Protection Technology, 2015, 27(5): 503-508.(in Chinese)
[58] CRAMPTON D D, HOLLOWAY K P, FRACZEK J. Assessment of weathering steel bridge performance in Iowa and development of inspection and maintenance techniques[R]. Iowa: Iowa Department of Transportation, 2012.
[59] HARA S, KAMIMURA T, MIYUKI H, et al. Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge[J]. Corrosion Science, 2007, 49(3): 1131-1142.
[60] 王春生,常全禄,翟晓亮,等.管翼缘组合梁桥设计与结构分析[J].钢结构,2015,30(6):17-21. WANG Chun-sheng, CHANG Quan-lu, ZHAI Xiao-liang, et al. Design and structural analysis of tubular flange composite girder bridge[J]. Steel Construction, 2015, 30(6): 17-21.(in Chinese)
[61] 朱劲松,郭晓宇,亢景付,等.耐候桥梁钢腐蚀力学行为研究及其应用进展[J].中国公路学报,2019,32(5):1-16. ZHU Jin-song, GUO Xiao-yu, KANG Jing-fu, et al. Research on corrosion behavior, mechanical property and application of weathering steel in bridges[J]. China Journal of Highway and Transport, 2019, 32(5): 1-16.(in Chinese)
[62] TAMAKI Y, SHIMOZATO T, ARIZUMI Y, et al. Evaluation of corrosion deterioration of weathering steel bridge under the environmental corrosiveness[C]∥Taylor and Francis. Proceedings of the 5th International Conference on Bridge Maintenance, Safety, Management and Life-cycle Optimization. London: Taylor and Francis, 2010: 3569-3575.

Memo

Memo:
-
Last Update: 2020-03-24