|Table of Contents|

Optimization on motion sequence of alignment platform between sensor intelligent chip and fiber array(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2019年05期
Page:
53-63
Research Field:
载运工具运用工程
Publishing date:

Info

Title:
Optimization on motion sequence of alignment platform between sensor intelligent chip and fiber array
Author(s):
TANG Hao1;  ZHANG Zi-lin1; 2;  ZHOU Bi-feng1;  TANG Guo-ning1
(1. College of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201,Hunan, China; 2. Faculty of Engineering, Lund University, Lund SE-22100, Scana, Sweden)
Keywords:
automobile engineering;  sensor;  precise motion platform;  motion sequence optimization;  orthogonal test
PACS:
U463
DOI:
-
Abstract:
Starting with the 720 types of possible motion sequence configurations of spatial motion of motion platform, the sensitivity of geometric error generated by each moving unit during the alignment process between the intelligent chip and fiber array was analyzed. Through distinguishing and classifying the sensitive and insensitive error of each motion unit, the number of motion sequence configurations was reduced to 90. Considering the uniform, decentralized, neat, and comparable characteristics of each motion unit, the orthogonal test design method was used to determine the sensitive and insensitive errors into 3 levels, and determine the 6 motion units into 6 influencing factors. The corresponding orthogonal test table was established, and 5 test paths of motion sequence configurations were obtained. The 5 test paths of motion sequence configurations were simulated through the MATLAB simulation platform, and the optimal motion sequence configuration of motion platform was obtained. The field test was conducted on the multi-degree-of-freedom precision motion platform of packaging system, and the simulation results were verified. Test result indicates that the optimal motion sequence of motion platform for docking the sensor intelligent chip and fiber array in space rectangular coordinates is moving along the horizontal axis first, then rotating around the horizontal axis, and then rotating around the vertical axis, and finally moving along the vertical axis. This method can not only optimize the spatial motion sequence of motion platform aligned by fiber scanning radar sensor smart chip and array optical fiber, but also can predict and plan the registration paths of other multi-degree-of-freedom motion platforms. 10 tabs, 10 figs, 30 refs.

References:

[1] LI Jing, SONG Ning-fang, YANG Gong-liu, et al. Improving positioning accuracy of vehicular navigation system during GPS outages utilizing ensemble learning algorithm[J]. Information Fusion, 2017, 35: 1-10.
[2] 王艺辉,刘延飞,赵鹏涛,等.基于九轴姿态传感器的智能汽车平面定位模块设计与实践[J].科技与创新,2018(6):3-6.
WANG Yi-hui, LIU Yan-fei, ZHAO Peng-tao, et al. Design and application of planar positioning module for intelligence vehicle based on 9-axis orientation sensor[J]. Science and Technology Innovation, 2018(6): 3-6.(in Chinese)
[3] TANG Hao, ZHANG Zi-lin, LI Chang-ping, et al. A geometric error modeling method and trajectory optimization applied in laser welding system[J]. International Journal of Precision Engineering and Manufacturing, 2019, 20: 1423-1433.
[4] 王金伟,郝 欣.基于雷达与光学传感器的协同定轨技术[J].中国电子科学研究院学报,2019,14(3):296-300.
WANG Jin-wei, HAO Xin. Cooperative orbit determination technology based on radar and optical sensor[J]. Journal of CAEIT, 2019, 14(3): 296-300.(in Chinese)
[5] 唐 铂,李振华,王春勇,等.线阵扫描三维成像激光雷达系统[J].激光与红外,2017,47(11):1358-1364.
TANG Bo, LI Zhen-hua, WANG Chun-yong, et al. 3D imaging laser radar based on laser array and APD array[J]. Laser and Infrared, 2017, 47(11): 1358-1364.(in Chinese)
[6] OMIDI E, KORAYEM A H, KORAYEM M H. Sensitivity analysis of nanoparticles pushing manipulation by AFM in a robust controlled process[J]. Precision Engineering, 2013, 37(3): 658-670.
[7] 安天益,朱启荣,吴 昊.基于光纤光栅传感器的复合材料损伤探测研究[J].实验技术与管理,2019,36(6):72-75.
AN Tian-yi, ZHU Qi-rong, WU Hao. Study on damage detection of composite materials based on optical fiber grating sensor[J]. Experimental Technology and Management, 2019, 36(6): 72-75.(in Chinese)
[8] 李 旭,李保柱.光纤扫描激光雷达技术[J].红外与激光工程,2008,37(5):793-796.
LI Xu, LI Bao-zhu. Fiber scanner radar technology[J]. Infrared and Laser Engineering, 2008, 37(5): 793-796.(in Chinese)
[9] SONG J B, CHOI S Y, PARK K. Aiming error analysis of guns ground combat vehicles operating on bumpy roads[J]. Journal of Mechanical Science and Technology, 2015, 29(12): 5145-5150.
[10] 刘 强,毕卫红,付兴虎,等.基于少模光纤长周期光栅叠栅的折射率传感特性[J].光子学报,2018,47(1):0106001-1-7.
LIU Qiang, BI Wei-hong, FU Xing-hu, et al. Refractive index sensing characteristic of superimposed long period gratings on few mode fiber [J]. Acta Photonic Sinica, 2018, 47(1): 0106001-1-7.(in Chinese)
[11] TANG Hao, LI Chang-ping, ZHANG Zi-lin, et al. A novel geometric error modeling optimization approach based on error sensitivity analysis for multi-axis precise motion platform[J]. Journal of Mechanical Science and Technology, 2019, 33(7): 3435-3444.
[12] BOHEZ E L J, ARIYAJUNYA B, SINLAPEECHEEWA C,
et al. Systematic geometric rigid body error identification of 5-axis milling machines[J]. Computer-Aided Design, 2007, 39: 229-244.
[13] TAN K K, HUANG S N, LIM S Y, et al. Geometric error modeling and compensation using neural networks[J]. IEEE Transactions on System Man Cybernetics—Part C: Applications and Reviews, 2006, 36(6): 797-809.
[14] ZI Bin, DING Hua-feng, WU Xia, et al. Error modeling and sensitivity analysis of a hybrid-driven based cable parallel manipulator[J]. Precision Engineering, 2014, 38(1): 197-211.
[15] 粟时平,李圣怡,王贵林.基于空间误差模型的加工中心几何误差辨识方法[J].机械工程学报,2002,38(7):121-125.
SU Shi-ping, LI Sheng-yi, WANG Gui-lin. Identification method for errors of machining center based on volumetric error model[J]. Chinese Journal of Mechanical Engineering, 2002, 38(7): 121-125.(in Chinese)
[16] 杨建国,任永强,朱卫斌,等.数控机床热误差补偿模型在线修正方法研究[J].机械工程学报,2003,39(3):81-84.
YANG Jian-guo, REN Yong-qiang, ZHU Wei-bin, et al. Research on on-line modeling method of thermal error compensation model for CNC machines[J]. Chinese Journal of Mechanical Engineering, 2003, 39(3): 81-84.(in Chinese)
[17] 田延岭,张大卫,陈华伟,等.基于微定位工作台的精密磨削过程动力学建模与误差补偿技术[J].机械工程学报,2005,41(4):168-173.
TIAN Yan-ling, ZHANG Da-wei, CHEN Hua-wei, et al. Modeling of precision grinding process based on micro-positioning table and error compensation technology[J]. Chinese Journal of Mechanical Engineering, 2005, 41(4): 168-173.(in Chinese)
[18] 王秀山,杨建国,闫嘉钰.基于多体系统理论的五轴机床综合误差建模技术[J].上海交通大学学报,2008,42(5):761-764,769.
WANG Xiu-shan, YANG Jian-guo, YAN Jia-yu. Synthesis error modeling of the five-axis machine tools based on multi-body system theory[J]. Journal of Shanghai Jiaotong University, 2008, 42(5): 761-764, 769.(in Chinese)
[19] ZUO Xiao-yan, LI Bei-zhi, YANG Jian-guo. Error sensitivity analysis and precision distribution for multi-operation machining processes based on error propagation model[J]. International Journal of Advanced Manufacture Technology, 2016, 86(1-4): 269-280.
[20] TANG Hao, DUAN Ji-an, LAN Shu-huai, et al. A new
geometric error modeling approach for multi-axis system based on stream of variation theory[J]. International Journal of Machine Tools and Manufacture, 2015, 92: 41-51.
[21] TANG Hao, DUAN Ji-an, ZHAO Qian-cheng. A systematic approach on analyzing the relationship between straightness and angular errors and guideway surface in precise linear stage[J]. International Journal of Machine Tools and Manufacture, 2017, 120: 12-19.
[22] 唐 皓,段吉安,郑 煜,等.平面光波导精密对准平台运动误差的敏感性分析[J].中国机械工程,2012,23(8):888-892,896.
TANG Hao, DUAN Ji-an, ZHENG Yu, et al. Motion error sensitivity analysis of planar optical waveguide precise aligning stage[J]. China Mechanical Engineering, 2012, 23(8): 888-892, 896.(in Chinese)
[23] WEI Wei-feng, ZHANG Guang-peng. Tool path modeling and error sensitivity analysis of crankshaft pin CNC grinding[J]. International Journal of Advanced Manufacturing Technology, 2016, 86: 2485-2502.
[24] TANG Hao, DUAN Ji-an, LU Sheng-qiang. Stream-of-variation(SOV)theory applied in geometric error modeling for six-axis motion platform[J]. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 2017, 120: 1-9.
[25] TIAN Wen-jie, GAO Wei-guo, ZHANG Da-wei, et al. A general approach for error modeling of machine tools[J]. International Journal of Machine Tools and Manufacture, 2014, 79: 17-23.
[26] 钱小辉,马骁妍,秦中华,等.基于正交试验的玻璃壳热应力影响因素分析[J].机械工程学报,2019,55(12):91-98.
QIAN Xiao-hui, MA Xiao-yan, QIN Zhong-hua, et al. Analysis of glass shell's thermal stress based on orthogonal experiment[J]. Journal of Mechanical Engineering, 2019, 55(12): 91-98.(in Chinese)
[27] 郭 芳,原 霞,吉梦雯,等.基于二次回归正交试验的连杆衬套成形质量分析[J].塑性工程学报,2018,25(5):153-157.
GUO Fang, YUAN Xia, JI Meng-wen, et al. Forming quality analysis of connecting rod bushing based on quadratic regression orthogonal test[J]. Journal of Plasticity Engineering, 2018, 25(5): 153-157.(in Chinese)
[28] 陈达亮,王 东,顾灿松,等.基于正交试验法的离合器动力学模型优化[J].机械工程与自动化,2018(4):160-162.
CHEN Da-liang, WANG Dong, GU Can-song, et al. Clutch dynamic model optimization based on orthogonal experiment method[J]. Mechanical Engineering and Automation, 2018(4): 160-162.(in Chinese)
[29] ZHAO Li-ping, CHEN Hong-ren, YAO Yi-yong, et al.
A new approach to improving the machining precision based on dynamic sensitivity analysis[J]. International Journal of Machine Tools and Manufacture, 2016, 102: 9-21.
[30] LIN Y, SHEN Y. Modelling of five-axis machine tool metrology models using the matrix summation approach[J]. International Journal of Advanced Manufacture Technology, 2003, 21(4): 243-248.

Memo

Memo:
-
Last Update: 2019-11-13