|Table of Contents|

Axle box spring load characteristics and fatigue damage of high-speed train(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2019年04期
Page:
81-93
Research Field:
载运工具运用工程
Publishing date:

Info

Title:
Axle box spring load characteristics and fatigue damage of high-speed train
Author(s):
YANG Guang-xue1 ZHANG Ya-yu1 LI Guang-quan2
(1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China; 2. CRRC Qingdao Sifang Co., Ltd., Qingdao 266111, Shandong, China)
Keywords:
vehicle engineering axle box spring load characteristic trend load dynamic load load spectrum fatigue damage
PACS:
U270.12
DOI:
-
Abstract:
Taking the axle box spring of high-speed train as the research object, the spring load test sensor installed on the power bogie was made through the load calibration method. The load-time history of axle box spring was obtained from line test. Combined with a vehicular gyroscope signal, the spring load characteristics of axle box were analyzed under typical working conditions, such as traction, braking, straight line with high or low speed, in and out of ramp, and curve line. According to the change characteristics of axle box spring load, the test load was decomposed into the trend load and dynamic load. On the basis of statistics, the load spectrum of axle box spring under certain mileage was given, the corresponding relationship between load amplitude and its frequency was determined. According to the damage consistency criterion, the damage proportion of load spectrum at all levels and the variation rule of fatigue damage of axle box spring with the increase of train speed were analyzed. Analysis result shows that the axle box spring load is linear with strain, and its transfer coefficient is94.5 kN-1. Compared with the non-power side axle box spring, the load amplitude of power side axle box spring is greatly influenced by the torque load of motor. During train start-up phase, the motor output torque reaches the maximum value. The loads on the power and non-power side axle box springs are -7.42 and 1.26 kN. When the train speed increases from 240 to 350 km·h-1, the axle box spring trend load varies from -0.6 to -2.0 kN, and the maximum dynamic load increases from 1.53 to 1.86 kN, which increases by 22%. The fatigue damage proportions of power side axle box spring are 0.79 and 0.75 when the train is in low and high speeds. The increase of train speed will slightly reduce the fatigue damage proportion caused by the high amplitude load of axle box spring, which is consistent with the distribution characteristics of non-power side fatigue damage proportion. The fatigue damages of both power and non-power side axle box springs tend to decrease first and then increase finally as the train speed increases. The fatigue damage reaches the minimum value when the train speed is around 300 km·h-1, and the fatigue damages of power and non-power side axle box springs are 0.110 and 0.004 respectively. 1 tab, 19 figs, 32 refs.

References:

[1] 王文静,惠晓龙,马纪军.高速列车设备舱支架疲劳裂纹机理研究[J].机械工程学报,2015,51(6):142-147.
WANG Wen-jing, HUI Xiao-long, MA Ji-jun. Fatigue crack mechanism research on high speed train equipment cabin frame[J]. Journal of Mechanical Engineering, 2015, 51(6): 142-147.(in Chinese)
[2] 李广全,刘志明,王文静,等.高速动车组齿轮箱疲劳裂纹机理分析研究[J].机械工程学报,2017,53(2):99-105.
LI Guang-quan, LIU Zhi-ming, WANG Wen-jing, et al. Fatigue crack mechanism study on high-speed EMU gearbox[J]. Journal of Mechanical Engineering, 2017, 53(2): 99-105.(in Chinese)
[3] 王文静,张 莹,曲俊生,等.高速列车齿轮箱箱体动应力响应及疲劳可靠性研究[J].中国铁道科学,2018,39(6):90-97.
WANG Wen-jing, ZHANG Ying, QU Jun-sheng, et al. Dynamic stress response and fatigue reliability of gearbox housing for G-series high-speed train[J]. China Railway Science, 2018, 39(6): 90-97.(in Chinese)
[4] 王文静,李广君,唐 薇,等.高速动车组轴箱弹簧疲劳失效机理研究[J].铁道学报,2015,37(6):41-47.
WANG Wen-jing, LI Guang-jun, TANG Wei, et al. Research on mechanism of fatigue crack of high speed train axle box spring[J]. Journal of the China Railway Society, 2015, 37(6): 41-47.(in Chinese)
[5] 张正远.机车弹簧碰撞情况下的损伤及疲劳寿命研究[D].成都:西南交通大学,2011.
ZHANG Zheng-yuan. Research on the damage and fatigue life of locomotive spring in the condition of collision [D]. Chengdu: Southwest Jiaotong University, 2011.(in Chinese)
[6] 谭 琳.25G型客车轴箱弹簧折断原因分析及预防措施[J].机车车辆工艺,2010(6):39-40.
TAN Lin.Fracture analysis of the journal box spring for 25G passenger coach and the precautions[J]. Locomotive and Rolling Stock Technology, 2010(6): 39-40.(in Chinese)
[7] 李广君.动车组轴箱弹簧接触疲劳研究[D].北京:北京交通大学,2014.
LI Guang-jun. Contact fatigue analysis on journal box spring of EMU [D]. Beijing: Beijing Jiaotong University, 2014.(in Chinese)
[8] 许 峰,陈怀海,鲍 明.机械振动载荷识别研究的现状与未来[J].中国机械工程,2002,13(6):526-531.
XU Feng, CHEN Huai-hai, BAO Ming. Force identification for mechanical vibration state-of-the-art and prospect[J]. China Mechanical Engineering, 2002, 13(6): 526-531.(in Chinese)
[9] 秦远田,陈国平,余 岭,等.复杂结构移动载荷识别的有限元法[J].南京航天航空大学学报,2008,40(2):174-179.
QIN Yuan-tian, CHEN Guo-ping, YU Ling, et al. Moving load identification using finite element method for complex structure[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2008, 40(2): 174-179.(in Chinese)
[10] 王济江,盛美萍,刘彦森,等.基于统计能量分析理论的结构载荷识别研究[J].电声技术,2008,32(8):77-80,86.
WANG Ji-jiang, SHENG Mei-ping, LIU Yan-sen, et al. Application research on loading identification of structures by statistical energy analysis method[J]. Audio Engineering, 2008, 32(8): 77-80, 86.(in Chinese)
[11] 任尊松,孙守光,李 强.高速动车组轴箱弹簧载荷动态特性[J].机械工程学报,2010,46(10):109-115.
REN Zun-song, SUN Shou-guang, LI Qiang. Axle spring load test and dynamic characteristics analysis of high speed EMU[J]. Journal of Mechanical Engineering, 2010, 46(10): 109-115.(in Chinese)
[12] 苏延文.非平稳激励下大跨桥梁随机响应方法研究与应用[D].成都:西南交通大学,2016.
SU Yan-wen. Study on random dynamic response analysis method and application for long-span bridges subjected to non-stationary excitations[D]. Chengdu: Southwest Jiaotong University, 2016.(in Chinese)
[13] BARTLETT F D, FLANNELLY W G. Modal verification of force determination for measuring vibration loads[J]. Journal of the American Helicopter Society, 1979, 62: 10-18.
[14] KARLSSON S E S. Identification of external structural loads from measured harmonic responses[J]. Journal of Sound and Vibration, 1996, 196(1): 59-74.
[15] 李东升,郭杏林.逆虚拟激励法随机载荷识别试验研究[J].工程力学,2004,21(2):134-139.
LI Dong-sheng, GUO Xing-lin. Experimental random loading identification using inverse pseudo excitation method[J]. Engineering Mechanics, 2004, 21(2): 134-139.(in Chinese)
[16] 姜金辉,陈国平,张 方.多点平稳随机载荷识别方法研究[J].振动工程学报,2009,22(2):162-167.
JIANG Jin-hui, CHEN Guo-ping, ZHANG Fang. Identification method of multi-point stationary random load[J]. Journal of Vibration Engineering, 2009, 22(2): 162-167.(in Chinese)
[17] 姜金辉,张 方,陈 寅.基于固有振型的复杂结构分布动载荷时域识别[J].振动、测试与诊断,2012,32(4):581-585.
JIANG Jin-hui, ZHANG Fang, CHEN Yin. Distributional load identification in time domain with the mode shape polynomial for complex structures[J]. Journal of Vibration, Measurement and Diagnosis,2012, 32(4): 581-585.(in Chinese)
[18] 王 萌,李 强,孙守光.基于应力响应的多频率激励载荷识别研究[J].铁道学报,2015,37(2):27-33.
WANG Meng, LI Qiang, SUN Shou-guang. Study of multi-frequency exciting load identification based on dynamic stress response[J]. Journal of the China Railway Society, 2015, 37(2): 27-33.(in Chinese)
[19] 文祥荣,缪龙秀.由实测应变响应识别结构动态载荷[J].铁道学报,2000,22(6):36-39.
WEN Xiang-rong, MIAO Long-xiu. Identification of structural dynamic load from measured strain response[J]. Journal of the China Railway Society, 2000, 22(6): 36-39.(in Chinese)
[20] 张曙光.高速列车转向架载荷谱测试与建立方法的研究[J].中国科学E辑:技术科学,2008,38(11):1805-1814.
ZHANG Shu-guang. Research on load spectrum test and establishment method of high speed train bogies[J]. Science in China, Series E: Technology Sciences, 2008, 38(11): 1805-1814.(in Chinese)
[21] 郭奇宗.CRH6型动车组转向架载荷谱试验研究[D].北京:北京交通大学,2014.
GUO Qi-zong. Study on testing for load spectrum of CRH6 bogie[D]. Beijing: Beijing Jiaotong University, 2014.(in Chinese)
[22] 王丹丹.转K6转向架摇枕载荷谱测试与疲劳寿命评估[D].北京:北京交通大学,2007.
WANG Dan-dan. Load spectrum test and structural life determination of bolster for the ZK6 bogie[D]. Beijing: Beijing Jiaotong University, 2007.(in Chinese)
[23] 朱 宁.200 km·h-1客运机车转向架构架结构载荷系标定方案研究[D].北京:北京交通大学,2008.
ZHU Ning. The research of load demarcation for 200 km·h-1 passenger transportation locomotive bogie frame[D]. Beijing: Beijing Jiaotong University, 2008.(in Chinese)
[24] CHENG Jun-sheng, YU De-jie, YANG Yu. Research on the intrinsic mode function(IMF)criterion in EMD method[J]. Mechanical Systems and Signal Processing, 2006,20(4): 817-824.
[25] 姜 涛,付志翼,王安麟.一种非平稳随机循环工况下的参数化载荷模型[J].东北大学学报(自然科学版),2016,37(6):845-850.
JIANG Tao, FU Zhi-yi, WANG An-lin. Parameterized load model under non-stationary random cyclic conditions[J]. Journal of Northeastern University(Natural Science), 2016, 37(6): 845-850.(in Chinese)
[26] SWAMI A, MENDEL J M. ARMA parameter estimation using only output cumulants[J]. IEEE Transactions on Acoustics Speech and Signal Processing, 1990, 38(7): 1257-1265.
[27] ZHANG Shu-guang. Study on testing and establishment
method for the load spectrum of bogie frame for high-speed trains[J]. Science in China, Series E: Technology Sciences, 2008, 51(12): 2142-2151.
[28] 薛 海,李 强,胡伟钢.1万t重载货车车钩载荷分布特性研究[J].铁道学报,2017,39(9):48-52.
XUE Hai, LI Qiang, HU Wei-gang. Research on coupler load distribution characteristics of 10 000 t heavy haul train[J]. Journal of the China Railway Society, 2017, 39(9): 48-52.(in Chinese)
[29] 高镇同.载荷谱的编制[J].航空学报,1980,2(2):36-37.
GAO Zhen-tong.Load spectrum establishment[J]. Chinese Journal of Aeronautics, 1980, 2(2): 36-37.(in Chinese)
[30] 李广全,王文静,杨广雪.高速列车齿轮箱载荷特性分析[J].机械工程学报,2018,54(4):270-277.
LI Guang-quan, WANG Wen-jing, YANG Guang-xue. Analysis on load characteristics of high-speed train gearbox[J]. Journal of Mechanical Engineering, 2018, 54(4): 270-277.(in Chinese)
[31] SHAO Yi-min, LIU Jing, MECHEFSKE C K. Drive axle housing failure analysis of a mining dump truck based on the load spectrum[J]. Engineering Failure Analysis, 2011, 18(3): 1049-1057.
[32] 李广全,刘志明,呙如兵,等.高速列车齿轮箱应力响应与疲劳损伤评估[J].交通运输工程学报,2018,18(1):79-88.
LI Guang-quan, LIU Zhi-ming, GUO Ru-bing, et al. Stress response and fatigue damage assessment of high-speed tain gearbox[J]. Journal of Traffic and Transportation Engineering, 2018, 18(1): 79-88.(in Chinese)

Memo

Memo:
-
Last Update: 2019-09-03