[1] 于金朋,余建勇,张立民.高速列车整备车体谐振分析[J].大连交通大学学报,2011,32(6):9-13.
YU Jin-peng, YU Jian-yong, ZHANG Li-min. The resonance analysis of complete car for high-speed train[J]. Journal of Dalian Jiaotong University, 2011, 32(6): 9-13.(in Chinese)
[2] 卢耀辉.铁道客车转向架焊接构架疲劳可靠性研究[D].成都:西南交通大学,2011.
LU Yao-hui. Study on fatigue reliability of welded bogie frame for railway vehicle[D]. Chengdu: Southwest Jiaotong University, 2011.(in Chinese)
[3] 朴明伟.车辆动态系统协同仿真及刚柔耦合关键技术的研究与应用[J].大连:大连交通大学,2010.
PIAO Ming-wei. Studies and applications on key technologies of collaborative simulation and rigid-flex coupling for vehicle dynamical systems[D]. Dalian: Dalian Jiaotong University, 2010.(in Chinese)
[4] 王英杰.考虑车体柔性的车桥动力响应分析及行车舒适性影响因素研究[D].北京:北京交通大学,2011.
WANG Ying-jie. Study on vehicle-bridge dynamic response with flexible carbody and riding comfort evaluation[D]. Beijing: Beijing Jiaotong University, 2011.(in Chinese)
[5] 缪炳荣,张卫华,肖守讷,等.基于多体动力学和有限元法的车体结构疲劳寿命仿真[J].铁道学报,2007,29(4):36-42.
MIAO Bing-rong, ZHANG Wei-hua, XIAO Shou-ne, et al. Carbody fatigue life simulation based on multibody dynamics and FEM[J]. Journal of the China Railway Society, 2007, 29(4): 36-42.(in Chinese)
[6] 吴会超,邬平波.车下设备悬挂刚度对车辆平稳性影响[J].噪声与振动控制,2012(4):73-77,130.
WU Hui-chao, WU Ping-bo. Effect of equipment suspension stiffness on riding quality[J]. Noise and Vibration Control, 2012(4): 73-77, 130.(in Chinese)
[7] 王盛明.基于功率流方法的高速列车车体与车下悬吊部件耦合振动研究[D].成都:西南交通大学,2018.
WANG Sheng-ming. Study on coupled vibrations between carbody and underframe suspended equipment of high speed trains based on power flow method[D]. Chengdu: Southwest Jiaotong University, 2018.(in Chinese)
[8] 罗光兵.高速列车车体及车下设备耦合振动研究[D].成都:西南交通大学,2014.
LUO Guang-bing. Study on coupled vibration of carbody and suspended equipments for high speed trains[D]. Chengdu: Southwest Jiaotong University, 2014.(in Chinese)
[9] 石怀龙,邬平波,罗 仁.高速动车组弹性车体和设备耦合振动特性[J].西南交通大学学报,2014,49(4):693-699.
SHI Huai-long, WU Ping-bo, LUO Ren. Coupled vibration characteristics of flexible car body and equipment of EMU[J]. Journal of Southwest Jiaotong University, 2014, 49(4): 693-699.(in Chinese)
[10] 田向阳.车下有源悬吊设备与车体耦合振动研究[J].噪声与振动控制,2018,38(1):137-142,219.
TIAN Xiang-yang. Study on the coupled vibration of underframe active rotational equipment andcarbody[J]. Noise and Vibration Control, 2018, 38(1): 137-142, 219.(in Chinese)
[11] 吴会超,邬平波,曾 京,等.车下设备对车体振动的影响[J].交通运输工程学报,2012,12(5):50-56.
WU Hui-chao, WU Ping-bo, ZENG Jing, et al. Influence of equipment under car on carbody vibration[J]. Journal of Traffic and Transportation Engineering, 2012, 12(5): 50-56.(in Chinese)
[12] 吴会超.高速动车组车体与车下设备耦合振动研究[D].成都:西南交通大学,2012.
WU Hui-chao. Study on coupling vibration of high-speed EMU between carbody and underframe equipment[D]. Chengdu: Southwest Jiaotong University, 2012.(in Chinese)
[13] 王 晨,徐凤妹,许自强,等.高速列车车体与动力包设备耦合振动分析[J].机车电传动,2016(5):12-16.
WANG Chen, XU Feng-mei, XU Zi-qiang, et al. Coupling vibration analysis between the DMUs carbody and power pack structure[J]. Electric Drive for Locomotives, 2016(5): 12-16.(in Chinese)
[14] 罗光兵,曾 京,罗 仁.车下设备悬吊方式对车体振动的影响[J].铁道学报,2015,37(5):9-14.
LUO Guang-bing, ZENG Jing, LUO Ren. The influence of underframe equipment suspended types on carbody vibrations[J]. Journal of the China Railway Society, 2015, 37(5): 9-14.(in Chinese)
[15] 罗光兵,曾 京.车下设备的连接方式及悬挂参数匹配研究[J].现代制造工程,2013(5):1-6.
LUO Guang-bing, ZENG Jing. Study on carbody flexible vibrations with considering underframe suspended equipment[J]. Modern Manufacturing Engineering, 2013(5): 1-6.(in Chinese)
[16] LUO Guang-bing, ZENG Jing, WANG Qun-sheng. Identifying the relationship between suspension parameters of underframe equipment and carbody modal frequency[J]. Journal of Modern Transportation, 2014, 22(4): 206-213.
[17] 向福腾,阳光武.吊挂设备隔振频率与刚度优化分析[J].机械设计与制造,2017(12):19-22.
XIANG Fu-teng, YANG Guang-wu. Suspension equipment vibration isolation frequency and stiffness optimization analysis[J]. Machinery Design and Manufacture, 2017(12): 19-22.(in Chinese)
[18] 田 程,桂良进,范子杰.采用序列响应面法的大客车结构振动频率优化[J].汽车工程,2010,32(10):833-836,887.
TIAN Cheng, GUI Liang-jin, FAN Zi-jie. Vibration frequencies optimization of bus structure using sequential response surface method[J]. Automotive Engineering, 2010, 32(10): 833-836, 887.(in Chinese)
[19] 陈 宏,袁浩东,张帅伟,等.基于振动能量的设备状态评价方法研究[J].机械设计与制造,2013(2):127-130.
CHEN Hong, YUAN Hao-dong, ZHANG Shuai-wei, et al. Research on the condition assessment method of equipment based on vibration energy[J]. Machinery Design and Manufacture,2013(2): 127-130.(in Chinese)
[20] 张明远,于金朋,张继旺,等.牵引变压器悬挂刚度采用响应面法的优化设计[J].噪声与振动控制,2015,35(1):127-131.
ZHANG Ming-yuan, YU Jin-peng, ZHANG Ji-wang, et al. Optimization design of suspension stiffness of traction transformers using response surface method[J]. Noise and Vibration Control, 2015, 35(1): 127-131.(in Chinese)
[21] 于金朋.高速列车车体固有频率分析及优化设计方法研究[D].成都:西南交通大学,2018.
YU Jin-peng. Research on inherent frequency analysis and optimization design method for high speed train carbody[D]. Chengdu: Southwest Jiaotong University, 2018.(in Chinese)
[22] 于金朋,张卫华,张立民,等.高速动车组车下吊挂设备隔振设计研究[J].铁道学报,2017,39(1):33-40.
YU Jin-peng, ZHANG Wei-hua, ZHANG Li-min, et al. Research on vibration isolation design of suspension equipment for high-speed train[J]. Journal of the China Railway Society, 2017, 39(1): 33-40.(in Chinese)
[23] 于金朋,宋青鹏,张明远,等.高速列车牵引变压器振动响应容限有限元分析[J].交通运输工程学报,2016,16(5):42-48.
YU Jin-peng, SONG Qing-peng, ZHANG Ming-yuan, et al. FEA of vibration response tolerance of traction transformer for high-speed train[J]. Journal of Traffic and Transportation Engineering, 2016, 16(5): 42-48.(in Chinese)
[24] 黄雪飞,于金朋,张丽博,等.车下设备与车体接口双层隔振系统隔振参数研究[J].噪声与振动控制,2015,35(3):67-72.
HUANG Xue-fei, YU Jin-peng, ZHANG Li-bo, et al. Study on vibration isolator parameters of the double-layer vibration isolation system of body-equipment EMU[J]. Noise and Vibration Control, 2015, 35(3): 67-72.(in Chinese)
[25] ZHOU J, GOODALL R M, REN L, et al. Influences of car body vertical flexibility on ride quality of passenger railway vehicles[J]. Proceedings of the Institution of Mechanical Engineers, 2009, 223(5): 461-471.
[26] 邓 海,宫 岛,周劲松,等.高速列车车体下吊设备隔振设计及试验研究[J].城市轨道交通研究,2015(2):44-48.
DENG Hai, GONG Dao, ZHOU Jin-song. On vibration isolation design and test of suspended equipment on high-speed railway vehicle[J]. Urban Mass Transit, 2015(2): 44-48.(in Chinese)
[27] SUN Wen-jing, GONG Dao, ZHOU Jin-song, et al. Influences of suspended equipment under car body on high-speed train ride quality[J]. Procedia Engineering, 2011, 16: 812-817.
[28] 余建勇,张立民,黄晓宇,等.车下吊挂设备对整备车车体模态的影响[J].噪声与振动控制,2012,32(5):97-100.
YU Jian-yong, ZHANG Li-min, HUANG Xiao-yu, et al. The influence of the hanging device on complete car's model[J]. Noise and Vibration Control, 2012, 32(5): 97-100.(in Chinese)
[29] 张相宁,李明高.动车组车下吊挂设备吊装装置的橡胶减振器研究[J].大连交通大学学报,2012,33(5):19-22.
ZHANG Xiang-ning, LI Ming-gao. Study on rubber isolator of hosting device for hanging EMU equipment[J]. Journal of Dalian Jiaotong University, 2012, 33(5): 19-22.(in Chinese)
[30] 陈 亮,康洪军,张立民.牵引变压器连接刚度对车体与设备振动影响分析[J].铁道车辆,2012,50(8):4-6,29.
CHEN Liang, KANG Hong-jun, ZHANG Li-min. Analysis of the effect of the connection stiffness of the traction transformer on vibration of carbody and equipment[J]. Rolling Stock, 2012, 50(8): 4-6, 29.(in Chinese)