|Table of Contents|

Calculation of reasonable-longitudinal-continuous length for bed plate of CRTSⅢ slab ballastless track(PDF)

《交通运输工程学报》[ISSN:1671-1637/CN:61-1369/U]

Issue:
2016年01期
Page:
55-62
Research Field:
道路与铁道工程
Publishing date:

Info

Title:
Calculation of reasonable-longitudinal-continuous length for bed plate of CRTSⅢ slab ballastless track
Author(s):
CAI Xiao-pei1;  ZHAO Lei1;  GAO Liang1;  ZHONG Yang-long1;  LAU Albert2
1. School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China;
2. Department of Civil and Transport Engineering, Norwegian University of Science and Technology, Trondheim 7491, Sør-Trøndelag, Norway
Keywords:
CRTSⅢ slab ballastless track;  bed plate;  longitudinal-continuous length;  structural strength;  lateral stability
PACS:
U213.213
DOI:
-
Abstract:
According to the design scheme of CRTSⅢ slab ballastless track on subgrade, the nonlinear interaction between multilayer structures was considered, and the spatial coupled models of track structure with different longitudinal-continuous lengths of bed plate were established based on finite element method. The lateral stability of track structure and the stresses and deformations of slab, self-compacting concrete layer and bed plate under the temperature load were computed, and the reasonable-longitudinal-continuous length of bed plate was analyzed. Analysis result shows that the lateral stability of slab track is satisfied when the continuous length of bed plate is greater than or equal to the connected length of 2 track slabs. Under the condition of temperature increasing 45 ℃, when the length of bed plate increases, the changes of stress and moment in track slab are not obvious, while the longitudinal displacement linearly increases, and the maximum increasing value is about 58%. For the self-compacting concrete layer, the changes of stress and deformation are more obvious than the values of track slab, and the maximum value of tensile stress is 0.949 MPa. Under the condition of temperature decreasing 40 ℃, the influence of continuous length on the bed plate stress is obvious. When the continuous length of bed plate reaches the connected length of 5 track slabs, the longitudinal tensile stress of bed plate increases to 2.67 MPa, which is close to the allowable limit of concrete tensile strength. In summary, based on taking into the factors of lateral stability and structural strength, the reasonable-longitudinal-continuous length of bed plate should be the connected length of 2-5 track slabs. 7 tabs, 15 figs, 23 refs.

References:

[1] 何华武.建立中国高速铁路技术体系的研究[J].铁道运输与经济,2006,28(12):1-10. HE Hua-wu. Research on establishing technical system of China high-speed railways[J]. Railway Transport and Economy, 2006, 28(12): 1-10.(in Chinese)
[2] 卢祖文.高速铁路轨道技术综述[J].铁道工程学报,2007,24(1):41-54. LU Zu-wen. Overall comments on track technology of high-speed railway[J]. Journal of Railway Engineering Society, 2007, 24(1): 41-54.(in Chinese)
[3] ESVELD C. Recent developments in slab track[J]. European Railway Review, 2003, 9(2): 81-85.
[4] EISENMANN J. Ballastless track as an alternative to ballasted track[J]. Rail International, 1995(11): 19-28.
[5] STEENBERGEN M J M M, METRIKINE A V, ESVELD C. Assessment of design parameters of a slab track railway system from a dynamic viewpoint[J]. Journal of Sound and Vibration, 2007, 306(1/2): 361-371.
[6] ANDO K, SUNAGA M, AOKI H, et al. Development of slab tracks for Hokuriku Shinkansen Line[J]. Quarterly Report of Railway Technical Research Institute, 2001, 42(1): 35-41.
[7] BACHMANN H, MOHR W, KOWALSKI M. The RHEDA 2000: ballastless track system[J]. European Railway Review, 2003, 9(1): 44-51.
[8] FREUDENSTEIN S. RHEDA 2000: ballastless track systems for high-speed rail applications[J]. International Journal of Pavement Engineering, 2010, 11(4): 293-300.
[9] 朱高明.国内外无砟轨道的研究与应用综述[J].铁道工程学报,2008,25(7):28-30. ZHU Gao-ming. Overall comments on study and application of ballastless track at home and abroad[J]. Journal of Railway Engineering Society, 2008, 25(7): 28-30.(in Chinese)
[10] BASTIN R.Development of German non-ballasted track forms[J]. Proceedings of the Institution of Civil Engineers—Transport, 2006, 159(1): 25-39.
[11] 高 亮,赵 磊,曲 村,等.路基上CRTSⅢ型板式无砟轨道设计方案比较分析[J].同济大学学报:自然科学版,2013,41(6):848-855. GAO Liang, ZHAO Lei, QU Cun, et al. Analysis on design scheme of CRTSⅢ slab track structure on roadbed[J]. Journal of Tongji University: Natural Science, 2013, 41(6): 848-855.(in Chinese)
[12] ZHU Kun-teng, ZENG Zhi-ping, WU Bin, et al. Study on the basic mechanical characteristics of CRTS III slab ballastless track[C]∥LIU Chang, CHANG Gui-ran, LUO Zhen. 2015 International Conference on Mechatronics, Electronic, Industrial, and Control Engineering. Paris: Atlantis Press, 2015: 1475-1478.
[13] 康 熊,刘秀波,李红艳,等.高速铁路无砟轨道不平顺谱[J].中国科学:技术科学,2014,44(7):687-696. KANG Xiong, LIU Xiu-bo, LI Hong-yan, et al. PSD of ballastless track irregularities of high-speed railway[J]. Science China: Technological Sciences, 2014, 44(7): 687-696.(in Chinese)
[14] ZHAO Ping-rui, LIU Xue-yi, LIU Guan. Experimental study of temperature gradient in track slab under outdoor conditions in Chengdu area[J]. Journal of Modern Transportation, 2014, 22(3): 148-155.
[15] ZHAO Chun-fa, SONG Xiao-lin, ZHU Xiao-jia. Temperature deformation analysis of CRTS II ballastless slab track[C]∥American Society of Mechanical Engineers. Proceedings of the Joint Rail Conference. New York: American Society of Mechanical Engineers, 2013: 1-6.
[16] 陈小平,王芳芳,赵才友.纵连底座板断裂对桥上CRTSⅡ型板式无砟轨道受力的影响[J].交通运输工程学报,2014,14(4):25-35. CHEN Xiao-ping, WANG Fang-fang, ZHAO Cai-you. Fracture influence of longitudinal-continuous base layer on force characteristics of CRTSⅡ slab ballastless track on bridge[J]. Journal of Traffic and Transportation Engineering, 2014, 14(4): 25-35.(in Chinese)
[17] ZHU Sheng-yang, CAI Cheng-biao. Interface damage and its effect on vibration of slab track under temperature and vehicle dynamic loads[J]. International Journal of Non-Linear Mechanics, 2014, 58: 222-232.
[18] LIU Xue-yi, ZHAO Ping-rui, DAI Feng. Advances in design theories of high-speed railway ballastless tracks[J]. Journal of Modern Transportation, 2011, 19(3): 154-162.
[19] YEN S T, LEE Y H. Parameter identification and analysis of a slab track system using 3D ABAQUS program[J]. Journal of Transportation Engineering, 2007, 133(5): 288-297.
[20] ESVELD C, MARKINE V. Assessment of high-speed slab track design[J]. European Railway Review, 2006, 12(6): 55-62.
[21] WANG Fa-zhou, LIU Zhi-chao, WANG Tao, et al. A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar[J]. Materials and Structures, 2008, 41(4): 643-647.
[22] LEI Xiao-yan, ZHANG Bin. Analysis of dynamic behavior for slab track of high-speed railway based on vehicle and track elements[J]. Journal of Transportation Engineering, 2015, 137(4): 227-240.
[23] 孙 璐,段雨芬,杨 薪.高速铁路CRTSⅢ型板式无砟轨道结构受力特性研究[J].铁道工程学报,2013,30(11):32-39. SUN Lu, DUAN Yu-fen, YANG Xin. Static response analysis of CRTSⅢ ballastless track structure[J]. Journal of Railway Engineering Society, 2013, 30(11): 32-39.(in Chinese)

Memo

Memo:
-
Last Update: 2016-02-20