[1] 周玉洁.热气腔结构的优化设计与数值模拟[D].南京:南京航空航天大学,2010.ZHOU Yu-jie. Optimal design and numerical simulation of the hot air cavity structure[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010.(in Chinese)
[2] THOMAS S K, CASSONI R P. Aircraft anti-icing and de-icing techniques and modeling[J]. Journal of Aircraft, 1996, 33(5): 841-854.
[3] 李航航,周 敏.飞机结冰探测技术及防除冰系统工程应用[J].航空工程进展,2010,1(2):112-115.LI Hang-hang, ZHOU Min. Engineering application of icing detection technique and anti-icing and deicing system on aircraft[J]. Advances in Aeronautical Science and Engineering, 2010, 1(2): 112-115.(in Chinese)
[4] 卜雪琴,郁 嘉,林贵平,等.机翼气热防冰系统设计[J].北京航空航天大学学报,2010,36(8):927-930.BU Xue-qin, YU Jia, LIN Gui-ping, et al. Investigation of the design of wing hot-air anti-icing system[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(8): 927-930.(in Chinese)
[5] 常士楠,袁美名,霍西桓,等.某型飞机机翼防冰系统计算分析[J].航空动力学报,2008,23(6):1141-1145.CHANG Shi-nan, YUAN Mei-ming, HUO Xi-heng, et al. Investigations of the bleed air anti-icing system for an aircraft wing[J]. Journal of Aerospace Power, 2008, 23(6): 1141-1145.(in Chinese)
[6] 姚会举.机翼热气防冰腔功能可靠性分析及优化设计[D].西安:西北工业大学,2014.YAO Hui-ju. Function reliability analysis and optimal design of the wing hot-air anti-icing cavity[D]. Xi’an: Northwestern Polytechnical University, 2014.(in Chinese)
[7] SILVA G A L, SILVARES O M, ZERBINI E J G J. Numerical simulation of airfoil thermal anti-ice operation, part 1: mathematical modeling[J]. Journal of Aircraft, 2007, 44(2): 627 -634.
[8] LIU H H T, HUA Jun. Three-dimensional integrated thermodynamic simulation for wing anti-icing system[J]. Journal of Aircraft, 2004, 41(6): 1291-1297.
[9] MORENCY F, TEZOK F, PARASCHIVOIU I. Heat and mass transfer in the case of anti-icing system simulation[J]. Journal of Aircraft, 2000, 37(2): 245-252.
[10] BROWN J M, RAGHUNATHAN S, WATTERSON J K. Heat transfer correlation for anti-icing system[J]. Journal of Aircraft, 2003, 40(1): 65-70.
[11] 杜雁霞,桂业伟,肖春华,等.飞机结冰过程的传热研究[J].工程热物理学报,2009,30(11):1923-1925.DU Yan-xia, GUI Ye-wei, XIAO Chun-hua, et al. Investigation of heat transfer in aircraft icing[J]. Journal of Engineering Thermophysics, 2009, 30(11): 1923-1925.(in Chinese)
[12] 管 宁.三维机翼防冰热载荷的数值模拟[D].南京:南京航空航天大学,2007.GUAN Ning. Numerical simulation of anti-icing thermal loads on a 3d airfoil[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.(in Chinese)
[13] 桑为民,蒋胜矩,李凤蔚.翼型冰增长和结冰影响的数值模拟研究[J].应用力学学报,2008,25(3):371-375.SANG Wei-min, JIANG Sheng-ju, LI Feng-wei. Numerical simulation for ice accretion and icing effects on airfoils[J]. Chinese Journal of Applied Mechanics, 2008, 25(3): 371-375.(in Chinese)
[14] 周志宏,易 贤,桂业伟,等.复杂3维外形霜状冰数值模拟[J]. 四川大学学报:工程科学版,2012,44(增2):158-162.ZHOU Zhi-hong, YI Xian, GUI Ye-wei, et al. Prediction of rime ice accretion on complex configurations[J]. Journal of Sichuan University: Engineering Science Edition, 2012, 44(S2): 158-162.(in Chinese)
[15] 张 强,高正红.基于六自由度方程的飞机结冰问题仿真[J].飞行力学,2013,31(1):1-4.ZHANG Qiang, GAO Zheng-hong. Simulation of ice accretion based on six degree-of-freedom equation[J]. Flight Dynamics, 2013, 31(1): 1-4.(in Chinese)
[16] 彭 珑,卜雪琴,林贵平,等.热气防冰腔结构参数对其热性能影响研究[J].空气动力学学报,2014,32(6):848-853.PENG Long, BU Xue-qin, LIN Gui-ping, et al. Influence of the structural parameters on thermal performance of the hot air anti-icing system[J]. Acta Aerodynamica Sinica, 2014,32(6): 848-853.(in Chinese)
[17] 卜雪琴,林贵平,郁 嘉.三维内外热耦合计算热气防冰系统表面温度[J].航空动力学报,2009,24(11):2495-2500.BU Xue-qin, LIN Gui-ping, YU Jia. Three-dimensional conjugate heat transfer simulation for the surface temperature of wing hot-air anti-icing system[J]. Journal of Aerospace Power, 2009, 24(11): 2495-2500.(in Chinese)
[18] SALTELLI A. Sensitivity analysis for importance assessment[J]. Risk Analysis, 2002, 22(3): 579-590.
[19] BORGONOVO E. A new uncertainty importance measure[J]. Reliability Engineering and System Safety, 2007, 92(6): 771-784.
[20] WANG Pan, LU Zhen-zhou, TANG Zhang-chun. Importance measure analysis with epistemic uncertainty and its moving least square solution[J]. Computers and Mathematics with Applications, 2013, 66(4): 460-471.
[21] LI Hong-shuang, LU Zhen-zhou, YUAN Xiu-kai. Nataf transformation based point estimate method[J]. Chinese Science Bulletin, 2008, 53(17): 2586-2592.
[22] 李 炜.边坡稳定性联合评价方法[J].交通运输工程学报, 2010,10(5):8-11.LI Wei. Combined evaluation method of slope stability[J]. Journal of Traffic and Transportation Engineering, 2010, 10(5): 8-11.(in Chinese)
[23] LIU Ying. Application of stochastic response surface method in the structural reliability[J]. Procedia Engineering, 2012, 28: 661-664.
[24] KAYMAZ I, MCMAHON C A. A response surface method based on weighted regression for structural reliability analysis[J]. Probabilistic Engineering Mechanic, 2005, 20(1): 11-17.
[25] 汪新槐.多维数值积分的数论方法及其在结构可靠度分析中的应用[D].南京:河海大学,2005.WANG Xin-huai. Number theoretical method for numerical multiple integrals and the application in structural reliability analysis[D]. Nanjing: Hohai University, 2005.(in Chinese)
[26] DAI Hong-zhe, WANG Wei. Application of low-discrepancy sampling method in structural reliability analysis[J]. Structural Safety, 2009, 31(1): 55-64.
[27] 戴鸿哲,王 伟.结构可靠性灵敏度分析的低偏差抽样方法[J].工程力学,2010,27(1):104-108.DAI Hong-zhe, WANG Wei. Low discrepancy sampling method for structural reliability sensitivity analysis[J]. Engineering Mechanics, 2010, 27(1): 104-108.(in Chinese)